Decathlon Company Info


Women’s All mountain Freeride Snowboard Serenity 500 Package


Women’s All mountain Freeride Snowboard Serenity 500 Package is designed for the confirmed snowboarder looking for an all mountain freeride snowboard to go on and off track.

A classic camber snowboard with medium torsion to hang on hard snow. Front spatula elongated with rocker to float in powder.

A photo of the Women’s All mountain Freeride Snowboard Serenity 500 Package in use


50% track, 50% off-track, 0% park.

Easy to handle

Medium torsion:great compromise between traction and ease of making medium turns


Very good buoyancy in powder (rocker, inserts back 15 mm).


Very good grip all snow (classic camber and medium torsion).

Anatomic design

57.9″: 5’3″ to 5’6″ 59.8″: 5’5″ to 5’8″ 61.2″: 5’7″ to 5’10”


Medium flex, wooden core and wide: quite sharp when passing from edge to edge.


Medium torsion: good balance between edge grip and tolerance of edge mistakes

Glide performance

Sole in extruded PE + graphite offering a very good quality of gliding.

Product Lifestyle Image Gallery

 Women's All mountain Freeride Snowboard Serenity 500 Package,navy blue  Women's All mountain Freeride Snowboard Serenity 500 Package,navy blue  Women's All mountain Freeride Snowboard Serenity 500 Package,navy blue  Women's All mountain Freeride Snowboard Serenity 500 Package,navy blue  Women's All mountain Freeride Snowboard Serenity 500 Package,navy blue  Women's All mountain Freeride Snowboard Serenity 500 Package,navy blue

Product Information



  • 70% Polyamide 6
  • 20% Stainless steel
  • 10% Foamed eva


  • 34% Fiberglass
  • 33% Wood – Hard
  • 33% Epoxy

A word from the product manager

We wanted to create a versatile board for people not attracted to the park. This board is adapted to a practice on track but also off-track with ease. And enjoyable! It was prototyped 100% in our design center, Mountain Store Passy in Haute-Savoie, before being tested in stations near our offices throughout its development.


The Serenity 500 is the ultimate All Mountain board: 50% track and 50% off-piste. You go everywhere, on all snow, on track, off-piste, and powder, of course. Do not use in parks: it is not intended for use on modules or for backward riding.

Directional snowboard

The shape of the board is directional, i.e. the board has a nose and tail. It is not symmetrical; the back of the board is slightly narrower than the front, the bindings and the contact points of the snowboard (setback) are a bit behind. A directional shape offers better grip when cornering, better trajectory management and better recovery when exiting a turn.

Standard camber + rocker

We keep all the advantages of the classic camber (thanks to the elasticity of the board, a classic camber acts as a spring to give grip on all the snow, the dynamism in edge-to-edge passage and recovery output turnaround) with in addition those of the rocker (under stress, the contact points of the board on the snow come closer and the board becomes more manageable). The rocker elongates and raises the nose so that it can glide better over powder.

Flex medium and versatile

The flex is the stiffness of the board between the front and rear. The flex of the Serenity 500 is about 3/5, which is medium and versatile. It brings a healthy behavior in cut corners but also a tolerance to edge errors.

Versatile and medium torsion

The torsion, stiffness of the board in torsion between the feet, is about 3/5 on the Serenity 500, which is stiff enough for a good behavior in curve, of the restart at the end of the turn and the nervousness in passage from square to square. This also gives the board a confirmed expert level while remaining very accessible physically.

Setback 15 mm

The setback is when the board’s compression points with the snow are not symmetrical in relation to the center of the board, but set back toward the rear. The bindings are also set back toward the rear by the same distance. 15 mm setback = significant decline for directional boards. It provides better grip in turns and buoyancy in powder snow because the weight is on the tail of the board, which naturally raises the nose.

Technical information

Size 59.8″ (152 cm) Width before 11″ (27.9 cm). Center 9.4″ (24 cm). Rear 11″ (27.9 cm). Radius 26′ (8.0 m). Effective square 43.2″ (1,097 mm). No. of inserts: 8 + 8 (3 possible positions per binding/40 mm between each). Recommended stance: 20.3″ (51.5 cm).

Sold in pack with “illusion 500” binding with spoiler typed track, off-piste

It’s an Illusion 700 without the EVA Full Pad with: – 3D foam ankle strap that hugs the shoe offering perfect support. The foam makes it possible to hold very tightly and to maintain a super comfort – front strap in cap strap positioned on the toes only for incredible comfort and support – easy opening system Turn Strap to no longer have the strap that impedes the insertion of the shoe 57.9″, 59.8″, 61.8″ (147 cm, 152 cm, 157 cm): fastening size M adapted to sizes 5.5 to 10.5 (EU 36 to 42)

When do i wax my snowboard?

Wed’ze boards are supplied already waxed. They require regular maintenance just like all snowboards and skis: ideally requires waxing every 5 outings and at least once a year: -either at the beginning of the season to start with a very good glide -or at the end of the season to nourish the base in depth and allow the wax to penetrate into the base throughout the summer”

Which size to choose for my serenity 500?

In All Mountain, one chooses -6″ or -8″ (for example, someone of 5’8″ (68″) can take a board between 60.6″ and 62.6″). As there is rocker on the Serenity, you can take it a little bigger. Choosing smaller makes things easier. This is also advised for people who are light for their height. Choosing bigger offers greater stability at high speed. 57.9″ (147 cm): 5’3″ to 5’6″ 59.8″: 5’5″ to 5’8″ 61.2″: 5’7″ to 5’10”

Sliding quality: Sintered sole

The soles are made of polyethylene but according to 2 different technical processes: – extruded base, with a certain density of polyethylene – a sintered base, with a higher density of polyethylene (fewer holes, more PE) A sintered base is the Rolls-Royce of bases. The slide is really fantastic.



Storage instructions

Dry edges at the end of the day to prevent rust. Ideally, wax every 5 outings. Storing for the summer: keep away from sunlight, you can leave your bindings on the board.